Haogenplast StoneTile liner
StoneTile gives a prefab pool the look of a stone-tiled finish, without grout lines that darken or tiles that come loose.
The surface is printed and embossed in two tile sizes, 15×15 cm and 40×20 cm, so it reads as stone cut into slabs. From a distance the pool looks built; up close you see the shade of each "tile".
The membrane is reinforced and has five layers of acrylic protection on top. They hold the colour against sun and chlorine and make it harder for stains to set.
A good fit if you like the style of a tiled pool but want the watertightness of a single membrane on a prefab pool.
Key features
| Type | Reinforced 3D membrane with a tiled look |
|---|---|
| Slip resistance | Class C |
| Watertightness (maker) | 15 years |
| Water temperature | up to 35 °C |
| Standard | EN 15836-2 |
| Colours | 8 |
StoneTile colours
Colours on screen differ from the real material. Ask us for a sample before you decide. Photos: Haogenplast.
Other Haogenplast ranges
StoneFlex
StoneFlex is the range that feels most like stone: a relief texture you can feel underfoot and patterns…
Larch
Larch lines the pool with the look of larch wood: printed grain with embossing that makes it look real.
Matrix
Matrix imitates glass mosaic: a pearl and silver layer under the surface breaks up the light so the floor…
3D-Uni
3D-Uni keeps the clean solid colours of the classic range and adds an even relief texture that feels like…
Classic
Classic is the traditional solid-colour liner: a smooth surface, nine clean colours and the easiest upkeep.
Printed Next Generation
Printed Next Generation brings designs printed onto the membrane: marbled blue, mosaic and water ripples…